-
-
Alenor OV TM is self-adhesive steam-insulating tape made of aluminum foil reinforced with durable synthetic thread.
-
-
-
Steam-throughput tape Alenor ON-T - UV
Alenor ON-T UV is a hydro-insulating and steam –throughput tape made of synthetic non-woven membrane type material with a foiled surface.
Tape purposed for hydro-insulation of lower assembly seam of light-clear surface (under the low tide) or any other building seams and joints. Tape has two adhesive stripes on the single or opposite sides (only order).
One side purposed for installation of tape to light-clear side, other for mounting of tape to the slope. Thanks to the foil surface, tape over Jay to UV radiation, which allows it to be whiter for a long time are not closed. Usage of hydro-insulating tapes provides reliable protection of polyurethane foam from moistening outside the room and provides removal of moisture out from the foam.
| Name | Units | Value |
| Color | – | metallic |
| Vapor permeability resistance | (m²×h×Pa)/mg | 0,04 |
| Watertightness | Pa | impermeable |
| Adhesive durability | MPa | 0,27 – 0,3 |
| UV resistance | month | 6 |
| Working temperature | °C | -36 – +80 |
| Installation temperature | °C | +5 – +40 |
| Durability | year | 20 |
| Code | Name | Width, mm | Length of roll, m |
| 134274 | Alenor ON T UV 70 | 70 | 25 |
| 134332 | Alenor ON T UV 100 | 100 | 25 |
| 134397 | Alenor ON T UV 150 | 150 | 25 |
