- cracks and crevices, seams in the plumbing rooms, plumbing communications;
- seams and joints in structures made of various materials (concrete, metal, wood, plastic, polycarbonate, etc.);
- window openings and doorways;
- joints in the places where the walls adjoin the floor, the places where pipes are output.
- high adhesion (stickiness) to most building materials;
- split liner for ease of installation;
- excellent fit of the adjoining, thanks to the optimized thickness of the butyl rubber layer of 0.7 mm;
- increased strength and elasticity of the tape, thanks to the dense base material (spunbond);
- the ability to self-seal in case of punctures and cuts;
- long service life;
- environmentally friendly, does not contain hazardous substances.
ALENOR® BUTYL FLEECE TAPE
ALENOR BUTYL FLEECE TAPE is a waterproofing tape based on PP non-woven fabric (spunbond) and butyl rubber sealant composition with permanent adhesiveness, which is protected with anti-adhesive paper.
WITHOUT BITUMEN! THE APPLICATION INSIDE RESIDENTIAL SPACES IS PERMITTED!
%201.jpg)
%203.jpg)
%202.jpg)
It is used for sealing:
Advantages:
|
Name |
Units |
Value |
|
Thickness of the tape |
mm |
0,7 ± 0,1 |
|
Vapor permeability coefficient |
mg/(m2×h×Pa) |
0,0002 ± 2% |
|
Water tightness |
– |
waterproof |
|
Adhesion to concrete |
kgf/cm² |
0,35 |
|
Adhesion to steel |
kgf/cm² |
0,45 |
|
Operating temperature |
ºС |
-40 – +100 |
|
Recommended application temperature |
ºС |
+5 – +40 |
|
Shelf life in original packaging |
months |
36 |
|
Life time |
years |
10 |
| Length, m | Width, mm | Thickness, mm |
| 5, 10, 20, 30 | 100; 120; 150; 200 | 0,7± 0,1 |
